Taking Apart A Pool Table
The pool is a game which is played on a table which has six pockets into which we can deposit the balls. It also has rails by which we can throw the balls into the pocket. The pool is a major classification of the cue sports; we can say it as a type of sports game. The pool game can be specified by many games at different places like eight-ball pool game, black ball, nine balls, ten balls etc. according to the design its name will be called.
The term pocket billiards is also used in place of pool game by some industries. This game is very popular and we can easily find this game in the malls or the pubs in the game zone department. People love to play this game and also enjoy the game. We can play this game easily if we know all about it.
If we want to disable the pool table, then we have to take the right method and right equipment to disassemble it. Also, we need the right amount of tools to disassemble the table. it has many parts and each part is disassembled by its method. We have to slowly disassemble the parts and also we have to take care of the parts some may be are sensitive to tear off and broke down easily, so we have to take care about each and everything about it. Here the method to disassemble the pool table easily by some tools and method.
The basic method of disassembling the pool table:-
Firstly we have the pool table and we have to disassemble each part then we have to take the right method and the right steps to dispatch it. Means that we have to start with line wise and then disable it. First, we have to disassemble the pockets from the table. Remove the pocket first and also remove the stables and pins which attach the pocket to the table. If we have screws then we have to remove the screws otherwise remove the staple or the pocket straps from it. If we don’t have the staple remover then we can use the screwdriver in place of it. But we have to remove the pockets first from the table. Also we have to wear the goggles to get safe from the falling staples.
There are mainly two or three or maximum four bolts under each rail. We have to remove the rails bolts which are below each rail. Remove it with the socket wrench. We have to remove the parts step by step so that we can easily remove the parts and also no part is being damaged.
After removing of each rail bolts, remove the rails from the table and if the rails are removed then the pockets holes are also removed by it. We have to take the help of one person so that we can easily pull up the rails from the table as the rail have weight the single person can’t remove the rail easily from the table. The pocket hole is also removed by the removal of the rails from the table.
After the removal of the rails and pockets, we have gone one step further. We can remove the felt from the slate bed. The felt is either glue or staple to the wood on the bed. If it is stable then we have to remove the staple part with the remover and also we have to take care about its tearing. We have to remove it slowly so that the felt does not tear easily. Or if it glues then we have to pull the edge part with the gentle touch or gently so that it cannot tear off. Once if we remove the felt then fold it so that it cannot tear by anyway. Also, we can avoid it with wrinkles and creases.
After this we have to remove the slate screws with the drill machine. These screws are generally found at the corner of the table, but sometimes it may be found with the centre or the sides of the slate. We have to remove the screws with the drill machine so that it can easily remove off. if we find the putty over the screws then we have to use the screwdriver to get easily off from the table and also we can save the slates from the scratching.
Most of the work is done, after this; we have to remove the slate and place at the corner of the floor. The slate has the more weight one person can easily take off and remove it so that take the help of the two-three people so that it can easily be loaded. We have to pull off easily because a single stretch can ruin the table. One piece slate has the weight of minimum 360kg one single man can lift it easily so take the help of the peoples to lift it easily and carefully. We have many numbers of slates in the pool table.
After this, we have to remove the frame. Remove the parts of the table easily so that we can easily dissemble the parts. Take apart the final pieces which have the lightweight over it. We can easily remove the parts of it. After dissembling of all parts we have to transport the slate part carefully with more safety. As it is the most difficult part as single stretch can ruin and damage the table. And this is the most important part.
So we can easily take apart the pool table. We have to remove the part slowly and safety and also with the right steps so that each part can easily be remove and easily we can get the disassembling of the table. We have to take care of the each part and also rake precautions while removing the parts. The above is the method to remove the pool table parts easily and dissemble it.
You Can Check Too :
Leave a Reply