Contents
Top 10 Best Snow Sports Helmets Or Skiing Helmets
Skateboard Riding And Helmet
Skateboard riding is one of the most played and enjoyable sport for both beginners and professionals. Skating is undoubtedly, a fun sport to enjoy however; it comes with its own set of precautionary factors. Since the sport includes a lot of jumping and balancing over the skateboard, there is a huge possibility of accidents and major falls causing severe injury to the body..
Head is most sensitive part of the body vulnerable to injury. Hence, protecting head is extremely vital and important before riding on a skateboard. An appropriate helmet exclusively meant to be used for the purpose of skating should be worn for protection and safety.
Need Of Skateboard Helmets
For a beginner who has just begun to skate would definitely tend to fall more than once. Even the professionals who are well familiar with the risks involved in skating prefer to wear skating helmets for safeguarding their head against any severe injuries. Although wearing a helmet will not prevent you from falling, it will reduce the chances of head injuries to major extent. A regular helmet contains soft pads fitted inside the shell of the helmet and reduces the impact of the fall, ultimately, safeguarding the head.
What to look for in a skateboard helmet
Choosing a right helmet for skating is no longer limited to bright colors and designing. Helmets have become a necessity for the safety of the head and pose a major safety standard rather than a mere head gear. To ensure getting a right skateboard helmet, one must consider below parameters for safety.
Fit of the helmet
Wearing a helmet without a proper fit is as good as wearing no helmet at all. Besides, wearing a bad fitted helmet makes a rider vulnerable to more risks than before. Most of the people measure their head with the help of an inch tape and get a helmet exactly of the size they need. Since, the size and fitting of a helmet vary from brand to brand; it is difficult to get a size common to each brand. Hence, getting precise head measurement for a perfect fit is best while selecting a helmet.
Safety and regulations
Wearing a safety helmet is a mandatory rule stated by the government in some states. There is a prescribed age range set as per the law which requires riders to wear helmet. Following the same regulation, most of the branded companies ensure their helmets passes the various test parameters and meets necessary regulations set by CPSC body. Therefore, picking a helmet that follows safety compliance and standard regulation not just safeguards the head but also imparts a peace of mind.
Price
There are abundance of companies and brands offering helmets with unique features and traits. Depending on the features they demonstrate, each helmet is priced differently. Though, it seems a little illogical to spend a lot over a helmet, a right and reasonable amount should be spent for purchasing one. One should purchase a helmet that fulfills a rider’s major set of expectation and is priced reasonably.
Listed below are some best top 10 best skateboard helmets that offer value for money quality to users :
Top 10 Best Skateboard Helmets
#1. Pro-Tec Classic Certified Skate Helmet
Description:
When it comes to skateboard helmets, pro-tec is known as a king of quality driven products that are most loved and used by its users. The brand has existed over years and has maintained a legacy of delivering high-performance products for its users. Pro-tec helmets not just meets the quality bar but also surpasses its user’s expectations by building products with bold designs.
The helmet is constructed with the advanced technology of enduring sudden impacts while riding a skateboard. It is a helmet with high density that has a special ABS plastic shell that is highly molded. Being equipped with 2 stage foam internal liner, this helmet produces best defense against bumps and falls of low impact.
There are more than one extraordinary features of this helmet that makes Pro-tec classic skate helmet one of the best. A plush moisture wicking liner of top notch quality is fitted inside this helmet that absorbs the sweat and without creating humidity. The helmet remains dry and keeps the rider fresh without causing any discomfort due to this exclusive wicking liner.
To further assure the safety, the helmet has been tested several times and successfully meets the safety standards set by CPSC, NZ and ASTM. The next best thing about this helmet is its completely pliable nylon- webbed straps. These straps a have a buckle that allows a user to lock the fit that is comfortable. As long as the nylon-webbed straps are fixed properly, there is no possibility of helmet removing from its place.
Protection from injuries is further enhanced due to the super cool vents installed inside the helmet. The vents regulate the air flow all over the helmet. The vents are positioned in a manner that allows maximum emission of heat from the helmet preventing the temperature to exceed its normal limit. Despite of all these remarkable features, the helmet manages to be light weight in its construction which makes it comfortable enough to wear and carry around without any burden.
ADVANTAGES
- Being equipped with 2 stage foam internal liner, this helmet produces best defense against bumps and falls of low impact.
- Wicking liner of top notch quality is fitted inside this helmet that absorbs the sweat and without creating humidity.
- Helmet has been tested several times and successfully meets the safety standards set by CPSC, NZ and ASTM.
- A total of 11 vents are installed in this helmet that allows maximum emission of heat from the helmet preventing the temperature to exceed its normal limit.
- Certified and tested by multiple commission bodies makes it really safe to use.
- The helmet is light weight in its construction which makes it comfortable enough to wear and carry around without any burden.
DISADVANTAGES
- Although these helmets are available in multiple patterns and designs, the matte finish of this helmet tends to get stained easily and show marks.
#2. Punisher Skateboards Pro Series 13-Vent Dual Safety Certified BMX Bike and Skateboard Helmet
Description:
Punisher is not an unfamiliar name in the brands of helmets and has been building multiple lines of products each catering to a specific requirement of the user. Punisher skateboards 11 is one of many product lines of Punishers built for imparting protection and safeguarding its user from harmful injuries while riding a skateboard.
Though this product line features many different variants, butterfly jive is the most popular and best -selling product from the main product line. Apart from safeguarding the user, the helmets provide a secure and snug fit to its user. The helmet includes an extra set of adjustable internal pads that can be fitted inside the helmet to make it one size smaller. Neck strap of the helmet is pretty pliable too and comes with an easy release buckle.
The helmet is engineered with a strong ABS plastic shell which has a black EPS foam liner fitted inside. The plastic shell adds to the long life of the helmet whereas the EPS foam liner works on absorbing excess sweat released by the user keeping the inside cool and dry. The cooling inside the helmet is further regulated by 11 remarkable vents that channels flow of cool air and keep the temperature normal. Unlike other helmets, Punisher skateboard 11 is not at all bulky and heavy. Being lightweight in nature, the helmet is very comfortable to wear.
The most satisfying aspect of any helmet is its ability to safeguard against any severe damages. Punisher excels this criterion by complying with all safety standards laid down by CPSC which reassures that the helmet is meant to withstand low sudden impact yet safeguarding the user from injuries.
ADVANTAGES
- Though this product line features many different variants, butterfly jive is the most popular and best -selling product from the main product line.
- The helmet includes an extra set of adjustable internal pads that can be fitted inside the helmet to make it one size smaller.
- Neck strap of the helmet is pretty pliable too and comes with an easy release buckle.
- EPS foam liner works on absorbing excess sweat released by the user keeping the inside cool and dry.
- The cooling inside the helmet is further regulated by 11 remarkable vents that channels flow of cool air and keep the temperature normal.
- Being lightweight in nature, the helmet is very comfortable to wear.
DISADVANTAGES
- The extra foam pad available with the helmet does not fit properly with the helmet causing improper and uncomfortable fitting.
#3. Bern Unlimited Brentwood Summer Helmet with Flip Visor
Description:
Bern demonstrates some extremely good looking skateboard and snowboard helmets that complement the street styled skateboard. This makes the helmet a perfect blend of style and safety. Owing to its beautiful designing and safety construction, this helmet is widely acceptable to majority of users.
Flip visor equipped in the helmet is the major highlight of the helmet. This unique feature of the helmet imparts fly capability to bounce particles. Also it further increases hipster style depending on the aim of the user. The overall exterior of the helmet is built of hard plastic material which provides strength and sturdiness.
The most fascinating feature of this helmet is its zip mold technology based on liquid foam. The technology offers a thinner profile to the helmet in comparison to regular helmets with EPS grey foam which also gives a better and compact shape to the product. Contrary to its construction, the fit dial of the helmet is located at the back of the gear.
The dial is simple and quick enough to secure the right position around the head. The dial is also convenient to loose and super easy to adjust as and when required. The helmet does not disappoint in complying with the safety standards by successfully meeting the certification from CPSC, ASTM F 2040 and EN 1078. Availability of a winter upgrade kit with this product is like putting a cherry on the cake. The upgrade kit allows the user to upgrade the product further to better enhance the quality of the helmet.
As far as temperature control aspect of the helmet is concerned, the product includes a couple of vents that do a great job in keeping the dump air out of the helmet and keeps the inside cool and dry.
ADVANTAGES
- Owing to its beautiful designing and safety construction, this helmet is widely acceptable to majority of users.
- The overall exterior of the helmet is built of hard plastic material which provides strength and sturdiness.
- The most fascinating feature of this helmet is its zip mold technology based on liquid foam. The technology offers a thinner profile to the helmet in comparison to regular helmets with EPS grey foam which also gives a better and compact shape to the product.
- Product meets the certification from CPSC, ASTM F 2040 and EN 1078 which further promises enhanced safety and protection.
- The product includes a couple of vents that do a great job in keeping the dump air out of the helmet and keeps the inside cool and dry.
DISADVANTAGES
- The visor fitted in the helmet is removable. However since it is attached with the padding, removing the visor may pull the pad along with it.
#4. Razor V-17 Youth Multi-Sport Helmet
Description:
Be it a beginner or a professional rider, everyone needs a durable and sturdy helmet for their protection while skating. Razor V-17 is one of the many products that offer durability with its hard shell construction along with a promise of the protection to its user. The fit of the helmet is equally important as its sturdiness. V-17 comes with a comfortable and soft cushion-like pads fitted inside the helmet.
Unlike other regular helmets, the internal padding is not at irritating and imparts a perfect fit to the user. Proper vents are positioned at the top of the helmet which regulates maximum airflow inside the helmet keeping sweat and humid air out. The arrangement of the vents is such that keeps the head gear cool even during hot summer days.
Razor V-17 strengthens its promise of protection further by being impact resistant. The product consists of a hard lining layer that absorbs the impact due to hit on the helmet. The helmet has a movable face shield that makes it best for the use with a skateboard.
Besides all the comfort this product has to offer, it is available in many different colors which make it vastly popular amongst teenagers and youth. Being available in different sizes, the helmet poses no problems of fitting. Straps tied to the helmet helps in holding the helmet at one place and does not opens up even in the event of a fall keeping the user safe.
ADVANTAGES
- Razor V-17 is one of the many products that offer durability with its hard shell construction along with a promise of the protection to its user.
- V-17 comes with a comfortable and soft cushion-like pads fitted inside the helmet.
- Proper vents are positioned at the top of the helmet which regulates maximum airflow inside the helmet keeping sweat and humid air out.
- The product consists of a hard lining layer that absorbs the impact due to hit on the helmet.
- It is available in many different colors which make it vastly popular amongst teenagers and youth. Being available in different sizes, the helmet poses no problems of fitting.
DISADVANTAGES
- At times, the straps get loose if not locked properly. Always check the strap of the product before purchasing one.
#5. S-ONE Lifer CPSC – Multiple Impact – CPSC Certified
Description:
S-One lifer helmet is exclusively known for its best fitting and comfortable placement. With its remarkable safeguarding technique, the product has been able to gain users trust and popularity.
The entire product comes with several soft pads that can be easily placed inside the helmet and can be adjusted to fit to different size while the outer shell remains the same. The soft pads are available in different sizes namely- small, medium, large and extra-large. The foams gives just the fit a user need without any discomfort.
The best part about the helmet is its amazing ability of enduring multiple impacts. The construction of the helmet includes ABS hard plastic shell with a deep fit designing that enables a user to position the helmet low and rest nicely over the head. Its ability to withstand severe hits and impacts is due to EPS fusion foam placed inside the helmet.
Despite of so many components installed, the helmet weighs less in comparison to other regular helmets and is very light weight. For all it offers, the helmet yet impresses its users by complying with all safety and protection standards. S-one lifer is certified for its protection against multiple impacts from ASTM F-1492. It is CPSC certified for imparting single high impact protection and holds a CE EN 1078 certification as well.
ADVANTAGES
- With S-one lifer’s remarkable safeguarding technique, the product has been able to gain users trust and popularity.
- The entire product comes with several soft pads that can be easily placed inside the helmet and can be adjusted to fit to different size while the outer shell remains the same.
- The best part about the helmet is its amazing ability of enduring multiple impacts.
- The construction of the helmet includes ABS hard plastic shell with a deep fit designing that enables a user to position the helmet low and rest nicely over the head.
- The helmet has dual certification for imparting impact less protection to its user.
DISADVANTAGES
- The size of the soft foam is not a standard one and may differ from person to person.
#6. Critical Cycles CM-2 Bicycle / Skateboard Helmet
Description:
The next best helmet in line is Critical’s skateboard helmet. Although Critical is not one of the premium brands, it has recently emerged and been known for producing top notch quality helmets. Traits demonstrated by this product are no less than other pricier brands.
The architectural details of this helmet include use of molded plastic for the outer shell with polystyrene foam fitted inside. Small extra soft foams are also available with the helmet that work like a cushion imparting extra comfort and fit. The total weight of the helmet is 1 lbs. making it extremely light weight and easy to carry on the head by the user.
The helmet has a nylon strap attached with it that holds the helmet in place preventing it from moving constantly. The strap has an adjustable buckle that locks the position and easily releases it opening it free. The helmet is high impact resistant and can withstand any major hit caused during a fall preventing a user to get hurt.
Its ability of surviving through hits and falls makes it just the right helmet for skateboarding. The helmets are prone to get dirty and soiled. Hence, the may get unwanted stains which may completely worsen the look of the helmet. Fortunately, the material used for the construction of Critical’s skateboard helmet allows for easy maintenance of the product. Helmet can be easily cleaned with the help of a mild soap and water causing zero damage to the color and texture of the helmet.
Like many other trusted brands, Critical’s skateboard helmet also complies with the safety standards and is CPSC certified.
Advantage :
- Use of molded plastic for the construction of the outer shell of the helmet imparts strength and durability to the helmet.
- Polystyrene foam fitted inside the helmet absorbs extra sweat keeping the helmet dry and fresh.
- The total weight of the helmet is 1 lbs. which makes it light weight in nature and easy to carry around the head.
- The helmet has a nylon strap attached with it that holds the helmet in place preventing it from moving constantly.
- The helmet is high impact resistant and can withstand any major hit caused during a fall preventing a user to get hurt.
Dis Advantage :
- The placement technique of extra foam cushion is bit outdated and makes the helmet a little bulky causing sizing issues.
#7. Triple Eight Gotham Dual Certified MIPS Skateboard And Bike Helmet
Description:
Featuring dual certification in CE EN 1078 and AS/NZS 206, triple eight is amongst those sorted helmets which are ideal to be used during skateboarding. The helmet is certified in CE EN 1078 for imparting protection during skateboarding whereas AS/NZ 206 certification makes the product apt to be used during bicycling.
The exterior of the product is designed with the exquisite quality of plastic for long life of the helmet. The polystyrene liner installed in the helmet keeps the head protected from sudden low impacts. Placement of vents inside the helmet perfectly regulates the air flow and keeps the temperature from exceeding normal limits.
The helmet also includes cushiony soft fit pads that no just provide a snug fit but also do a remarkable job in absorbing sweat and maintaining the cooling effect. For easy adjustability to the user, the helmet comes with 2 additional set of fit pads allowing a user to customize the fit as per his comfort and convenience.
The sweat liner attached inside the helmet can be easily removed owing to its perfect pliable nature and can be fitted back as desired by the user. Triple eight helmets are available in variety of colors with a smooth satin finish imparting it a perfect stylish look.
Advantage :
- Featuring dual certification in CE EN 1078 and AS/NZS 206, triple eight is amongst those sorted helmets which are ideal to be used during skateboarding.
- The exterior of the product is designed with the exquisite quality of plastic for long life of the helmet.
- Placement of vents inside the helmet perfectly regulates the air flow and keeps the temperature from exceeding normal limits.
- For easy adjustability to the user, the helmet comes with 2 additional set of fit pads allowing a user to customize the fit as per his comfort and convenience.
- The sweat liner attached inside the helmet can be easily removed owing to its perfect pliable nature and can be fitted back as desired by the user.
Disadvantage :
- Sizes available with the helmet are not standard one and may differ from person to person. It is better to get the proper measurement of the head before settling for a specific choice of size.
#8. JBM Skateboard Helmet CPSC ASTM Certified
Description:
JBM creates new levels of quality parameters for its rivalry brands that claim to be the best in delivering quality products. Featuring CPSC and ASTM certification, JBM presents a helmet that is best capable of surviving sudden impacts while riding a skateboard.
The helmet has been constructed with ultra- tough shell designed with a soft lining capable of handling extreme pressure caused due to a hit or fall during skating. Placement of multiple vents equipped with aerodynamic designed foam keep the humidity at bay by absorbing excess sweat. Even during hot summer days and intense body movements, this remarkable helmet does an exceptional task in maintaining the cooling effect.
Next best aspect of this helmet is its super cool adjustable strap. The strap ensures a secure fit and does not let the helmet deviate from its position. The helmet is also light weight in nature which further reduces any possibility of improper fitting.
Moreover the use of this helmet is just not limited to skateboarding. With its exceptional features, this helmet can be widely used in roller skating, inline skating scoter and other activities. The dimensions of the helmet measures 19.7 inches to 20.9 inches for small size, 20.9 inches to 22 inches for medium sized and 22.8 inches to 23.6 inches for large size.
Besides being certified from safety commission bodies, the helmet comes with 1 year warranty which is an absolute peace to mind.
Advantage :
- Featuring CPSC and ASTM certification, JBM presents a helmet that is best capable of surviving sudden impacts while riding a skateboard.
- The helmet has been constructed with ultra- tough shell designed with a soft lining capable of handling extreme pressure caused due to a hit or fall during skating.
- Placement of multiple vents equipped with aerodynamic designed foam keep the humidity at bay by absorbing excess sweat.
- The strap ensures a secure fit and does not let the helmet deviate from its position.
- The helmet is also light weight in nature which further reduces any possibility of improper fitting.
Disadvantage :
- Though, the overall quality is the helmet is excellent, some issues have been reported regarding the chin guard of the helmet which becomes loose and comes off.
#9. Flybar Skateboard Helmet- Dual Certified CPSC Multi-Sport Impact Protection for Youth and Adults for Bike
Description:
A helmet that offers stylish looks and also safeguards the user is hard to find. However, with flybar helmets around, getting style with protection is now possible. Flybar presents a range of helmets in 7 different colors and designs to choose from. There is versatility in the pattern of designing and helmets are available in both print and solid colors.
Unlike other regular helmets, users of flybar helmets do not have to stick with one odd color and will have plenty of options to select. Each style of the helmet is available in 3 different sizes namely small/medium, medium/large and large/extra- large. The small/medium size measures from 53-55 cm/20.8-21.6 inch; medium/large measures from 55-58 cm/21.6-2.8 inch and large/extra-large measures from 58-61 cm/22.8-24 inch.
The protection of the helmet is further enhanced with the strong outer shell composed of a hard ABS plastic material with EPS foam lining inside. It not just helps in reducing the effect of impacts but also provides comfortable and secure fit. To lock the position of the helmet, a spin dial is fixed at the strap of the helmet.
The dial on the strap is adjustable and can be positioned by spinning the dial. Its advanced feature may lead the user to think that the helmet is bulky and heavy. However, the helmet is absolutely light in weight. The integrated chin strap is made up of soft pads which also hold the position and does not lets the helmet move.
Advantage :
- Flybar presents a range of helmets in 7 different colors and designs to choose from.
- Each style of the helmet is available in 3 different sizes namely small/medium, medium/large and large/extra- large.
- The protection of the helmet is further enhanced with the strong outer shell composed of a hard ABS plastic material with EPS foam lining inside.
- To lock the position of the helmet, a spin dial is fixed at the strap of the helmet. The dial on the strap is adjustable and can be positioned by spinning the dial.
Disadvantage :
- Vent working mechanism is pretty decent however may fall behind in comparison with other products.
#10. KUYOU Skateboard Helmet Adjust Size Multi-Impact ABS Shell
Description:
Listed last in the list, Kuyou skateboarding helmet is no less than a performer in safeguarding a user against severe injuries from hits and falls. It has been CE certified and complies with the safety standards of EN1078 and CPSC standards. The multiple certification from safety commission bodies are enough alone to prove the worthiness of this helmet.
However, the features demonstrated by this beauty are worth a description. The helmet comes with an adjustable spin dial which can be removed and placed again as and when desired by the user. The dial needs to be rotated to attain the right fit needed to secure the position.
The helmet is available in different sizes namely small, medium and large. Sizes are created to fit certain head measurements. For instance small size has a head measurement of 48-54 cm/18.89-21.27 inches; medium size has a measurement of 55-57 cm/ 21.65 – 22.44 inch and large size measures 58-62 cm/ 22.83 – 24 inch.
Owing to its tough construction with durable plastic shell with soft liner fitted inside, the helmet is capable of enduring severe pressure from outside and safeguarding the user. Being a multi-sport gear is yet another beneficial aspect of this helmet. Majorly equipped with great defending techniques, this helmet makes up for a best head gear for skating activities.
A maximum of 11 vents are positioned inside the helmet that allow the circulation of cool and fresh air inside the helmet. Being lightweight it is very easy to carry the helmet over the head.
Advantage :
- A maximum of 11 vents are positioned inside the helmet that allow the circulation of cool and fresh air inside the helmet.
- Being lightweight it is very easy to carry the helmet over the head.
- Extra foaming pads are also included with the helmet to provide a better fit.
- It has been CE certified and complies with the safety standards of EN1078 and CPSC standards.
- The helmet comes with an adjustable spin dial which can be removed and placed again as and when desired by the user.
- Owing to its tough construction with durable plastic shell with soft liner fitted inside, the helmet is capable of enduring severe pressure from outside and safeguarding the user.
Disadvantage :
- Overall aspects of the helmet are pretty good. However, some users do not find the size of the helmet appropriate and does not fit their heads.
Like These As Well :
Leave a Reply